ServicesWhole-Home Filtration
Whole-Home Filtration in Menomonee Falls
A whole-home filter cleans your water at the main line, before it reaches a single faucet, shower or appliance. We match the system to your plumbing, install it to code and leave your mechanical room as neat as we found it.
How whole-home filtration works and who it suits
The system is a tank or cartridge housing placed on your main supply line, a short distance past the meter. Most of what we install uses activated carbon, usually paired with a sediment prefilter ahead of it. Carbon does a very good job of pulling out the chlorine or chloramine taste and odor in city water, as well as fine grit and some organic compounds.
It makes sense when the problem shows up throughout the house, not only in a glass of drinking water. If drinking and cooking water is your only concern, a reverse osmosis unit under the kitchen sink usually gives you more for the money. Scale and spotting point to hardness instead, which our Water Softeners page explains. We will be straightforward about which option fits what you describe.
Since the work connects to your main supply, we approach it as a plumbing job before anything else. A licensed Wisconsin plumber installs every system.
What the installation includes
Sizing to your flow
We look at your pipe size, the number of bathrooms and how your household uses water. An undersized filter drops pressure when two showers run at once, so we choose the tank or housing to keep flow steady.
Bypass and shutoff valves
We fit a bypass so water keeps flowing to your home during filter service, plus isolation valves on each side. You can change a cartridge or service the tank without draining the house.
Electrical bonding jumper
Cutting into a metal water line can break the path your electrical system uses for grounding. We install a bonding jumper across the new equipment so that continuity is kept, a detail that is easy to skip and important to get right.
Proper drain connection
Backwashing carbon tanks discharge to a drain. We run that line with the required air gap so drain water can never be drawn back into your supply.
Permit handling
Where your municipality requires a plumbing permit for the work, we pull it and arrange any inspection. You do not have to call the village or wait on hold.
Cleanup and a walkthrough
We clear away pipe offcuts and packaging, wipe down the area and show you the bypass, the shutoffs and when the media or cartridges are due.
Signs a whole-home filter is worth considering
A pool smell in the shower
Warm water lets chlorine escape into the air, so a steamy bathroom is where you notice it most. A filter at the kitchen sink cannot help with that.
Coffee and ice taste off
When drinks and ice from different taps share the same chemical note, the source is the supply line rather than any one faucet.
Dry skin or brittle hair
Some people find their skin and hair feel softer once the shower water is free of chlorine. We treat that as a comfort improvement, not a health claim.
Grit in aerators and fixture screens
Fine sediment builds up in faucet aerators and the inlet screens on appliances. A sediment stage in front of the carbon traps it first.
Pitcher filters at every sink
If you are buying cartridges for several pitchers plus a fridge filter, a single system on the main line is often easier to live with.
From first call to finished install
- 1
Talk it over by phone
Let us know what has been bothering you about the water and a few details about the house. We lay out the system choices, explain financing through U.S. Bank Avvance on approved credit and tell you what the quote will cover.
- 2
Site visit and written quote
We look at the main line, the area near the meter and the nearest drain, then give you the quote on paper. Your price is good for 30 days. After you sign, you still have three business days to cancel if you decide against it.
- 3
The install
With the water shut off, we cut in the isolation valves and the filter, add the bonding jumper and run the drain line. Plan on a few hours without water while we work, and we lay floor protection wherever we walk inside.
- 4
Final checks
We flush the new media, look over every connection for drips and confirm your pressure holds. Full payment is due only after the installation is finished.
What moves the cost
Price depends far more on your home than on a catalog figure. We walk through each factor in the quote so the number makes sense before you sign.
- System type and capacity
- A cartridge housing costs less up front but needs regular cartridge changes. A backwashing carbon tank costs more and lasts years between media changes. Larger homes need more media to keep flow up.
- Your main line
- Copper, PEX or older galvanized pipe each take different fittings. Corroded or awkward plumbing near the meter can add time.
- Space and drain access
- A finished basement or a meter tucked behind storage may need extra piping. Tanks also need a drain within a reasonable run.
- Permit requirements
- Some municipalities require a permit and inspection for this work. Where that applies, the fee and our time are listed on your quote.
Questions about whole-home filtration
Something not covered here? (262) 440-9018
Will a whole-home filter soften my water?
No. Activated carbon targets chlorine along with off tastes and smells. The hardness minerals that leave scale, calcium and magnesium, pass straight through it. If you want both treatments, we can set up a carbon filter alongside a softener, usually with the filter ahead of it so chlorine never reaches the softener resin.
Does this need a permit in Menomonee Falls?
It can, depending on the municipality and the scope of the plumbing. Because the equipment connects to your main supply, we check the current requirement for your address before any work begins. If a permit applies, we file for it and schedule any inspection that comes with it.
Will my water pressure drop?
A correctly sized system should cause only a small change that most people never notice. When pressure falls off in a real way, the cause is almost always equipment too small for the house. We avoid that by choosing the system based on your pipe size and how many people use water at once, not a single standard model.
How much upkeep is there?
Cartridge housings need new cartridges at regular intervals, and the bypass valve means the rest of the house keeps its water while you swap them. A backwashing tank rinses itself on a schedule and needs fresh carbon only every several years. We explain the maintenance for your particular system before we leave.
What is covered if a part fails?
Our lifetime coverage applies to tanks, valve ceramic discs and dry mechanical parts. Carbon media and filter cartridges are consumed as they work, so changing them is routine maintenance and not something the warranty covers.
Start with a phone conversation
Tell us what you notice at the tap or in the shower, and we will suggest a system that fits your home, explain how the installation goes and cover the financing options. We serve Menomonee Falls, Germantown, Brookfield and nearby communities.